高强度大桥缆索用盘条生产现状分析

最近5年，大桥缆索用镀锌钢丝抗拉强度有了大幅提高，从1 770 MPa级、1 860 MPa级、1 960 MPa级到目前的2 000 MPa及以上级别，扭转指标有了颠覆性的改变，从之前的几转到目前的十几转、二十几转。论述了国内外钢铁企业生产大桥缆索镀锌钢丝用盘条的不同现状。从成分设计、生产工艺流程、盘条韧化处理方式和组织特点等方面进行阐述，讨论了国内外不同生产工艺特点及发展趋势，为中国大桥缆索镀锌钢丝用盘条的生产提供理论支持。     

基于ATP-ABE的访问控制方案

对访问控制机制中存在的安全性和有效性的问题进行了研究，提出了基于访问树剪枝的属性加密ATP-ABE（Access Tree Pruning Attribute Based Encryption）的访问控制方案。当ATP-ABE算法需要访问它的树型结构访问策略时，通过剪枝处理访问树结构中包含用户ID属性节点的分支，提高了用户所有者DO（Data Owner）管理和控制属性的效率，更加有效地实现了数据共享。还为访问树结构设计了许可访问属性，使DO仍保留共享数据的关键属性，并且能够完全控制它们的共享数据。基于决策双线性密钥交换算法DBDH（Decisional Bilinear Diffie-Hellman）假设分析了ATP-ABE方案的安全性，研究结果表明与两种经典ABE方案比较，ATP-ABE更加有效地减少了算法的系统设置、私钥生成、密文大小、用户属性撤销以及加解密过程中的计算开销，并给出了定量结论。     

基于深度学习的彩色以及近红外图像去马赛克

单传感器捕获的彩色-近红外（RGB-NIR）图像存在光谱干扰，从而导致重建出的标准彩色图像（RGB）图像与近红外（NIR）图像存在色彩失真以及细节信息模糊。针对这个问题提出一种基于深度学习的去马赛克方法，通过引入跳远连接与稠密连接解决了梯度消失和梯度弥散问题，使得网络更容易训练，并且提升了网络的拟合能力。首先，用浅层特征提取层提取了马赛克图像的像素相关性以及通道相关性等低级特征；然后，将得到的浅层特征图输入到连续多个的残差稠密块以提取专门针对去马赛克的高级语义特征；其次，为充分利用低级特征与高级特征，将多个残差稠密块提取到的特征进行组合；最后，通过全局跳远连接恢复最终的RGB-NIR图像。在深度学习框架Tensorflow上使用公共的图像与视觉表示组（IVRG）数据集、有植被的户外多光谱图像（OMSIV）数据集和森林（Forest）三个公开数据集进行实验。实验结果表明，所提方法优于基于多级自适应残差插值、基于卷积卷积和神经神经网络以及基于深度残差U型网络的主流的RGB-NIR图像去马赛克方法。     

选钼尾矿选铁工艺改进探索

汝阳东沟选钼尾矿选铁工艺投产3年以来至今未能达产达标，为给该选厂工艺流程改造提供指导，对选钼尾矿进行了工艺矿物学分析，并采用新型磁选机进行流程改造试验。结果显示：钼尾矿中磁铁矿属于微细粒难选磁铁矿，铁在磁铁矿中的分布率仅为45.45%，其余部分主要以赤（褐）铁矿的形式存在。新型磁选机试验表明，精矿铁品位提高明显，且作业回收率均稳定在94%以上，设备选别指标好。     

Experimental study on flame spread along fuel cylinders in high pressures

Flame spread over solid fuels in high‐pressure situations, such as nuclear containment shells during a pressurized period, has potential to result in catastrophic disaster, thus requiring further knowledge. This paper experimentally reveals the flame spread behaviors over fuel cylinders in high pressures. Polyethylene and polymethyl‐methacrylate cylinders with the diameter of 4.0 mm are used in this study. Ambient gas is air, and total pressures are varied from naturally normal pressure (100 kPa) to elevated pressure (500 kPa). Flame characteristics including flame appearance and flame size and burning rate and flame spread rate are investigated. Results show that in high pressure, the flame appearance is significantly affected. As the pressure increases, the blue flame disappeared, and the color of flame tip changes from luminous yellow to orange as well the orange part extends down towards the base of flame. The dimensionless flame height increases with pressure for pressure below 150 kPa and then decreases with pressure above that level. The burning rates show increasing trend with pressure and are proportional to P^0.6 and P^0.79 for polymethyl‐methacrylate and polyethylene, respectively. Besides, flame spread rates for polymethyl‐methacrylate and polyethylene both were found to be proportional to P^0.5.     

Computer Network Assisted Test of Spoken English

With the development of computer network technology, the means of foreign language teaching have changed. Computer aided spoken English test is a new test method, and there is a great advantage compared with the traditional oral test. In order to further understand the superiority of the computer aided spoken English test, this study took the sophomores of Foreign Language Department in Henan University of Chinese Medicine, China, as the subjects and carried out the traditional interview-type spoken English test and computer-assisted spoken English test. The score system based on Hidden Markov Model (HMM) was used, and then the two tests were carried out. The performance in the two tests was compared, and the attitudes of the participants to the computer assisted Spoken English test were analyzed in the form of questionnaires. The results showed that the computer aided spoken English test could better reflect the true level of the students, and the teachers and students clearly stated that the computer aided spoken English test could relieve tension and reduce the burden of teachers. The research verified the feasibility of the computer-assisted spoken English test, which provides a reference for the promotion of the computer-assisted spoken English test.     

冶金矿物和产品水分测定问题探讨

水分测定是冶金行业中矿产原料和产品分析的重要内容,主要包括交货水分、湿存水、化合水等测定类别。尽管水分测定方法本身相对简单,但其涉及到矿物原料、产品结算交割以及其他化学分析的校正计算,属于重要的基础性测定方法。各类矿物、产品几乎都有相应水分测定的国家标准、行业标准,部分还是从国外ISO标准体系中采标而来。文章系统介绍并比较各类矿物原料、产品中交货水分、明水、湿存水、化合水等类别的测定方法。由于ISO标准体系中湿存水含义和国内标准体系湿存水含义有较大差异,其测定操作和用途也有不同,使用空气平衡样品和密封原始样品将会得到数据差异较大的湿存水数据,两种湿存水含义需要明确区分。湿存水对化学称样量、灼减量、化合水的测定有影响,需要用湿存水进行水分校正,才能得到更精确的结果。     

Research on the machinability of A-plane sapphire under diamond wire sawing in different sawing directions

Due to its superior mechanical, optical and chemical properties, sapphire (α-Al₂O₃) is widely used in engineering, optics, medicine, and other scientific research fields. The atomic structure of sapphire gives rise to anisotropy in its mechanical properties, which affects the machinability of sapphire materials on different crystal planes. Different cutting directions will affect the wafer economy and surface quality achieved during wire sawing due to this anisotropy. In this study, the machinability of A-plane sapphire was investigated for diamond wire sawing in three different directions, following the C-plane, R-plane and M-plane. The results show that the direction following the M-plane could be the best direction for diamond wire sawing because this direction results in the minimal sawing forces, the lowest specific energy and the smallest volume of material that will need to be removed during subsequent processing. These characteristics correspond to the direction with the highest fracture strength since the material is removed by brittle machining. The force ratio for sawing in the direction of the R-plane is the smallest because this direction is associated with the minimum hardness and the lowest critical load for the transition from plastic to brittle removal of the workpiece material. The 3D height parameters show no obvious pattern among the three sawing directions. The mechanism of material removal is mainly brittle removal, with some plastic removal, and is obviously affected by the crystal orientation.